donderdag 24 maart 2011

About the chrome

There's a lot of BS on the internet about chrome and its alternatives, I can tell you that. After reading lots of websites I was none the wiser until I had a chat with the kind people of Chromage Mossu, one of the few chroming companies in Belgium. They're only a couple of minutes drive away from me.
I've added up some numbers and it seemed that buying every chrome part on the car new (or having it exchanged) would add up to about €6000. Pretty steep. I've also asked for prices with other companies and one gave me a quote of about €4500. Still pretty steep. Meanwhile, I've learned why.

In this picture, from top to bottom: three times (almost) the same part, the B post moulding. The top one had one half sanded down and sprayed with chrome paint from a can. The middle one is "as it was", and the bottom one has been de-chromed by Mossu. As you can see, it's copper. (Also note: the top one is from the MK2, the bottom ones from the 240. On the Mk2 the B post moulding is 2 pieces, on the 240 the moulding is a bit bigger on the bottom and the second part isn't needed anymore.)


The difference between a (sloppy) chrome-from-a-can paint job - it was just a try - and real chrome.


Mr. Mossu said: "this is the finish you should achieve before rechroming".


Easier said than done on a part like this.


After the first sanding with a fine sanding disc. Better, but still no mirror finish.


After polishing with grey polishing paste and a cotton (or is it felt) thing on my drill. This is beginning to look like it.


Unfortunately, there still are some dents and things, so I'll probably start over but with a coarser sanding disc first.




I asked if the dechroming was really necessary. Apparently, chrome is very hard so it would require a lot of work to sand off the chrome. That's why it's better to have it removed chemically.

The good thing is: the most time-(and money)-consuming part about rechroming is the polishing. So if I do this myself I will save a lot of money. Not only that, it will also be a lot faster, because there's a waiting list of months if I'd have the polishing done by the chroming company. If I do it myself, there isn't much work to be done for them except hanging it in the chrome bath and some minor repair works, so they can do it "in between".

1 opmerking:

  1. I just came across your blog which is really interesting. Especially what you wrote about de- and re-chroming! I will check that up, because here here in Sweden it is really expensive. Thank you - Anders Hallberg

    BeantwoordenVerwijderen